3D printed Christmas figurines are small holiday characters you can bend, pose and set out for the season, then pack away without worrying about chips or broken glass. We added seven of them to the shop on October 14: Santa, a Snowman, a Gingerbread Man, a Gnome, a Christmas Bell, a Holiday Elf Set and a Gingerbread Snake.
This guide is for anyone decorating a mantel, filling stockings or setting up a holiday shelf with children. It covers what each piece is, which ones move, what a set costs and when to order. The short version: Santa, the Snowman, the Gingerbread Man and the Gnome are $7 each, or $8 with a keychain ring, the Elf Set is $15 with all its treats, and the Gingerbread Snake is $25.
Seven 3D Printed Christmas Figurines in Our Catalog
Here is the whole group, in the colors shown on each product page.
Santa wears a red suit with white trim and buttons, a red hat, white boots and a fluffy white beard.
The Snowman is white with a light blue beanie and pompom, coal-black eyes, a carrot nose and two black buttons.
The Gingerbread Man is cookie brown with red candy eyes, a green icing smile, two white buttons and green icing stripes at his wrists and ankles.
The Gnome has a tall mint green hat with a white brim, a matching coat, black boots and a white beard that hides everything but his nose.
The Christmas Bell is a yellow bell with a red bow on top and a small hole through the bow.
The Holiday Elf Set is an elf in a red suit and pointed hat, plus a spread of tiny printed treats.
The Gingerbread Snake is a long brown snake trimmed in white icing swirls, with red and green gumdrops down its back and white snowflakes on top.
Santa, the Snowman, the Gingerbread Man and the Gnome
These four are sold the same way. There is no size menu. The only choice is Keychain: No for $7, the standing figure, or Keychain: Yes for $8, which adds a ring for a backpack, lanyard or set of keys.
Each one is printed in place as a single articulated piece. The arms and legs move, and Santa, the Snowman and the Gingerbread Man also turn at the waist. They hold whatever pose you set, so Santa can wave from the mantel one day and sit on the edge of a shelf the next.
The product pages do not give a measurement for these four. If size matters, for a shadow box or a cake topper, message us before you order and we will measure one.
Which one suits which spot
Santa is the obvious center of a display, and the 3D printed Santa stands well on a tree skirt or next to the cookie plate.
The Snowman works on a winter shelf that stays up past New Year, since nothing about it says December 25.
The Gingerbread Man suits a kitchen windowsill or a baking basket.
The Gnome is the one people keep out all year. It sits as well in a plant pot as it does by the tree.
The Bell and the Gingerbread Snake Are Sold Differently
The Christmas Bell is a keepsake, not a flexi
The Bell is the one piece in this group with no joints. It is a solid decoration, and the small hole through the bow takes a ribbon or an ornament hook.
It is sold the same way as the four characters: $7 on its own, or $8 with a keychain ring. Hung from a ribbon, it works on a tree branch, a wreath or a gift tag. With the ring, it can ride on a purse or a set of keys all season.
If you want more pieces that hang, our 3D printed Christmas ornaments guide covers keychain flexis on hooks and larger pieces draped over branches.
The Gingerbread Snake is one piece at $25
The Gingerbread Snake is the most detailed of our 3D printed Christmas figurines. It has ball-and-socket style joints along the whole body, so it slides into S curves, coils up or stretches out long across a mantel or the middle of a table.
There are no options to choose. It is the one to give someone who already collects our snakes and dragons, or a baker who likes a joke.
The Holiday Elf Set: One Elf and a Night of Snacks
The elf moves at the arms and legs, so it can sit on a shelf edge, lean on a mug or reach for a cookie. It comes with:
- a donut box with six frosted donuts
- a pizza box with a pepperoni pizza
- a platter of chocolate chip cookies with a glass of milk
- a mug of cocoa with marshmallows
- a mug of milk
The elf and every accessory come together for $15. There are no options to choose.
Many families move an elf to a new spot each morning in December. The treats give that routine something to work with: the elf caught in the pizza box one day, asleep next to the cocoa the next. The Holiday Elf Set page shows every piece together.
The treats are small. Keep them away from pets and from children young enough to put things in their mouths.
What a Set of 3D Printed Christmas Figurines Costs
Economy shipping is free on orders over $35 and $3.99 below that. Here is how a few sets add up.
One per stocking. Santa, the Snowman and the Gingerbread Man come to $21, plus $3.99 shipping. With rings, the same three are $24.
The four characters and the elf. Santa, the Snowman, the Gingerbread Man and the Gnome ($28) with the Elf Set ($15) come to $43 and ship free.
The gingerbread mantel. The Gingerbread Snake ($25), the Gingerbread Man ($7) and the Bell ($7) come to $39 and ship free.
All seven. The four characters and the Bell ($35), the Elf Set ($15) and the Gingerbread Snake ($25) come to $75, shipped free.
Colors: Classic Christmas or Your Own Scheme
Every product page has a Custom color box above Add to cart. Type the colors you want there. If one is out when your order comes up, we message you with the closest match before printing.
The photo colors are the ones people expect, and they are always a safe choice. Changing them is where a set becomes yours.
A silver and blue tree suits a Snowman with a navy hat, a Bell in silver and a Gnome in blue.
A farmhouse scheme suits a Gnome with a red hat, a Bell in green and the Gingerbread Man as shown.
School or team colors work on Santa's suit or the Snowman's hat, which makes a good gift for a coach or a teacher.
To make a whole order match, type the same colors on each product page or add a note in the cart.
When to Order for Decorating Weekend
Every piece is printed after you order, then inspected and shipped within 1 to 3 business days. Economy transit usually takes another 2 to 5 business days, and carriers slow down around Thanksgiving and in December.
For decorations that go up after Thanksgiving, order by mid-November.
For an elf that starts its routine on December 1, order by mid-November too, so the set is in the house before the first morning.
For stockings, earlier is better. Ordering in November leaves time to fix a wrong color or a lost package before December 25.
You can also pick up at our Canton Trade Days booth. The remaining 2026 shows are October 29 to November 1 and December 3 to 6, and to pick up there, message us before you order.
Common Questions About 3D Printed Christmas Figurines
Can they go outside or in a window?
Indoors is best. PLA softens above about 140°F, so keep them out of a hot car and away from heaters, and avoid a sunny window that gets very warm.
Can I hang Santa or the Snowman on the tree?
Yes, if you choose Keychain: Yes. The ring takes an ornament hook or a loop of ribbon. The standing versions have no hanging point.
How do I store them after the holidays?
A small box in a closet works well. Avoid a hot attic, and keep the Elf Set's treats in a bag so the small pieces stay together.
What if one arrives broken?
Every piece is inspected joint by joint before it ships, and our product pages offer a free reprint if it arrives broken. Message us with a photo and we will sort it out.
Pick Your 3D Printed Christmas Figurines by Where They Will Sit
Start with the spot. For a stocking or a shelf, Santa, the Snowman, the Gingerbread Man and the Gnome are $7 each. For a tree, choose them with a ring for $8, or add the Bell. For a December morning routine, the Elf Set is $15 with all its treats, and for a mantel, the Gingerbread Snake is $25.
Then pick the colors. The photo colors are classic, and the Custom color box handles anything else. Order by mid-November and the set will be ready for decorating weekend.
At Cosmic 3D Creations, every Christmas figurine is printed to order in premium PLA in Como, Texas, inspected before it ships and sent within 1 to 3 business days. If you would rather see them in person, check our Canton Trade Days dates and find us at booth 4268/4269.